What This Hardware Set Includes
The Titanium Hardware (SET of 2) - Anodized Bronze, HFB-Short from Half Face Blades is a pair of T-25 Torx screws made from titanium. They feature a bronze anodized finish and are designed as replacement hardware for bolt-on knives. Because titanium does not corrode, this set offers a durable upgrade over standard steel hardware.
Why Titanium and Anodized Bronze Matter
Titanium is naturally corrosion-resistant, so these screws won't rust even in humid or wet conditions. The anodized bronze finish is more than cosmetic: anodizing creates a hard, wear-resistant surface layer that helps the color last longer than painted or coated alternatives. For a knife that sees regular use, this means less frequent replacement and a consistent look.
Product Facts
- Titanium Hardware (SET of 2) - Anodized Bronze, HFB-Short: Ti L - hardware set of 2, tool - T-25 torx. This hardware will work on most knives from approx 2022-present. Confirms the set fits the majority of recent Half Face Blades models, so you can upgrade your knife's hardware without guessing compatibility.
Titanium Hardware (SET of 2) - Anodized Bronze, HFB-Short - Titanium Hardware (SET of 2) - Anodized Bronze, HFB-Short: Ti does not corrode and is the best hardware to use for bolt on tools. Corrosion resistance is the main reason to choose titanium. It protects the screw threads and the knife handle from rust damage over time.
Caring for Your Anodized Bronze Titanium Hardware
- Clean with mild soap and water: Wipe the screws with a soft cloth dampened with warm water and a drop of mild dish soap. Avoid abrasive cleaners, steel wool, or scouring pads, which can scratch the anodized finish.
- Dry thoroughly after cleaning: Use a lint-free cloth to dry the hardware completely. Although titanium does not corrode, moisture trapped between the screw and the knife can affect the fit over time.
- Apply a light lubricant to threads (optional): If you disassemble your knife often, a tiny drop of lightweight oil (like mineral oil or a dedicated knife lubricant) on the T-25 threads can make installation smoother. Wipe off any excess.
- Store in a dry place: Keep the hardware in a pouch or compartment away from humidity. The anodized finish is durable, but extended exposure to salt spray or chemicals may dull the bronze color.
Fitment Notes and What to Check
This hardware set is designed to fit most Half Face Blades knives made from approximately 2022 onward, including models like the Feather Light, Scalper, Extremis, Tosahwi, Ishi, Buteo, Vulture, Congressman, Beef, Disaster Cub, Gulo Gulo, Skinner Jr, and IWB. However, because many knives are handcrafted, the counter bore (the recess where the screw sits) can vary slightly. If the hardware does not fit your knife, Half Face Blades offers a custom fitting service: you can email them to send in your knife for adjustment. Note that no return label is provided if the hardware does not fit—they will refund you instead.
What to Avoid
Do not use harsh solvents like acetone, bleach, or ammonia on anodized titanium. These chemicals can strip the anodized layer and alter the bronze color. Also avoid overtightening the T-25 screws: titanium is strong but can gall (bind) if over-torqued. Use moderate, even pressure when installing.
