OSS Spike Black/OD Green G10: Grip and Coating Care FAQ

Start with what the OSS Spike is actually built from

The OSS Spike is a compact fixed blade with a 3.6-inch blade and an 8.2-inch overall length. The blade is 3V American steel at .20 inches thick, finished with DLC coating, and the handle is Black/OD Green G10 with a textured grip secured by Allen bolts. It ships with a Cerakote Kydex sheath. Those four elements—textured G10, DLC-coated steel, Allen hardware and a Kydex sheath—set the care questions worth asking.

Supplied build details that shape your care routine

• OSS Spike - Black/OD Green G10, DLC Coating, Allen Bolts, Textured Grip: Blade: 3.6 inches, 3V American steel, .20 inches thick, DLC coating. The steel and coating determine how you clean the blade and what you avoid abrading.

  

• OSS Spike - Black/OD Green G10, DLC Coating, Allen Bolts, Textured Grip: Handle: Black/OD Green G10 with a textured grip, held by Allen bolts. Texture traps debris and the bolts are the only user-visible fasteners to check.
• OSS Spike - Black/OD Green G10, DLC Coating, Allen Bolts, Textured Grip: Sheath: Cerakote Kydex sheath included. The sheath is part of the carry system and should be kept clean alongside the knife.

Cleaning and protecting the DLC-coated blade

How should I clean the DLC coating without damaging it?

The supplied record describes DLC as a low-reflectivity, durable surface but does not include a manufacturer cleaning procedure. A conservative approach is to wipe the blade with a soft, damp cloth and mild soap, then dry it fully. Avoid abrasive pads or polishes, which can dull the coating's appearance even if the steel underneath is unaffected.

Does DLC coating mean I can skip drying the blade?

No. The coating covers the blade surface, but the supplied information does not claim it makes the steel rust-proof. Dry the blade after cleaning or exposure to moisture, and keep the edge and any exposed steel at the tip or spine in mind.

Can I sharpen a DLC-coated blade?

Sharpening removes steel and will remove coating along the bevel. The supplied record gives no sharpening angle or method, so follow the sharpener or service you trust rather than a number from this article. Expect the sharpened edge to look different from the coated flats.

What should I keep off the blade?

The supplied evidence does not list chemical restrictions. As a practical rule, avoid leaving acidic or salty residue on the blade and avoid harsh solvents near the G10 handle, since the record does not confirm chemical resistance for either material.

Textured Black/OD Green G10: cleaning and grip

How do I clean textured G10 without smoothing the grip?

Use a soft brush or cloth with mild soap and water to lift debris from the texture, then dry the handle. The record does not specify a cleaning product, so avoid aggressive scrubbing or abrasives that could wear the texture. The textured grip is a supplied feature, and keeping it free of packed dirt preserves the feel.

Will oil or sweat hurt the G10?

G10 is a composite handle material, and the supplied record does not list a finish or oiling requirement. Wipe off heavy sweat, sunscreen or oils after use rather than letting them sit in the texture. If the grip feels slick, clean and dry it before assuming the material has changed.

Does the Black/OD Green color need special care?

The record lists the color as Black/OD Green G10 but gives no colorfastness or fading information. Keep the knife out of prolonged harsh sunlight and clean off solvents promptly; those are general habits, not manufacturer instructions from the supplied record.

Allen bolt maintenance on the OSS Spike

Should I tighten the Allen bolts?

The record confirms Allen bolts are used for assembly but gives no torque value or tightening schedule. Check them by feel for looseness during cleaning, and if one moves, tighten gently with the correct size key. Do not force it; over-tightening can damage the G10 or the fastener, and the supplied information does not authorize a specific torque.

What if a bolt works loose or strips?

The supplied record does not list replacement bolt sizes or a hardware kit. Contact Half Face Blades for the correct replacement rather than substituting a random bolt, since length and thread are not confirmed here.

Do I need threadlocker?

The supplied evidence does not mention threadlocker. If you choose to use it, apply it sparingly and keep it off the G10 surface; the record does not confirm compatibility with the handle material.

Carry, storage and the Cerakote Kydex sheath

How should I store the OSS Spike?

Store it clean and dry, ideally in the included Cerakote Kydex sheath. The record does not give a storage specification, but keeping moisture and grit away from both blade and handle is consistent with the materials listed. Check the blade before sheathing so debris does not get trapped against the edge or coating.

Does the Kydex sheath need care?

The record identifies the sheath as Cerakote Kydex but gives no care instructions. Wipe it out if grit accumulates, and let it dry before inserting the knife. Avoid leaving the blade wet inside the sheath.

What is not confirmed by the supplied information?

The record does not include a sharpening angle, torque specification, cleaning chemicals, rust warranty or replacement hardware sizes. Treat those as questions for Half Face Blades rather than assumptions, and use the supplied facts above as the reliable baseline for your routine.