Back to Blog
How-to Guides 2026-11-11 Half Face Blades | tools that cut deep 0 views

SHPOS Black Burlap Micarta: Setup and Carry Guide

SHPOS Black Burlap Micarta: Setup and Carry Guide

Learn how to set up and carry the SHPOS knife with its Black Burlap Micarta handle, Allen bolts, and textured grip. Practical tips for plate carrier or low-vis use.

What the SHPOS Black Burlap Micarta Setup Offers

The SHPOS (Sub Human Piece Of Shit) knife from Half Face Blades is a compact fixed blade designed with input from Special Operators. Its Black Burlap Micarta handle, Allen bolts, and textured grip make it suited for easy carry and quick access in plate carriers or low-visibility situations. This guide covers setup, carry considerations, and what to keep in mind based on the supplied specifications.

SHPOS Key Specifications

  • SHPOS- Black Burlap Micarta, Allen Bolts, Textured Grip: 7.7" OA, 3.2" blade, .15" thickness, S45vn American steel, acid etch and rock wash finish, jimping on spine. These dimensions and materials define the knife's compact profile, blade toughness, and corrosion resistance. The jimping on the spine improves thumb traction during controlled cuts.
    SHPOS- Black Burlap Micarta, Allen Bolts, Textured Grip
    SHPOS- Black Burlap Micarta, Allen Bolts, Textured Grip
  • SHPOS- Black Burlap Micarta, Allen Bolts, Textured Grip: Kydex sheath included, blade designed for pushing or stab and slash movements. The Kydex sheath provides secure retention and allows multiple carry positions. The blade geometry favors defensive or utility movements in tight spaces.

Handle and Grip Setup

The Black Burlap Micarta handle offers a stable, moisture-resistant grip that conforms to the hand over time. The textured grip surface and Allen bolts (rather than mosaic pins) allow you to disassemble the handle for cleaning or hardware replacement if needed. The jimping on the spine adds extra control for thumb indexing.

When setting up the knife, ensure the Allen bolts are snug but not over-tightened. The supplied information does not specify a torque value, so use hand-tightening with a standard Allen key and check periodically for loosening during heavy use.

Carry Options for the SHPOS

  1. Plate Carrier Mount: The blade is designed for easy access in a plate carrier. The Kydex sheath can be attached to MOLLE webbing or a dedicated plate carrier mount (not included). Position it for a natural draw with your dominant hand.
  2. Low-Visibility (Low-Vis) Carry: For concealed or low-vis use, the compact 7.7" overall length and Kydex sheath allow IWB (inside waistband) carry with a suitable clip or strap. The acid etch and rock wash finish reduces glare.
  3. Belt or Pocket Carry: The Kydex sheath can be worn on a belt using a loop or Tek-Lok (not included). For pocket carry, ensure the sheath provides complete blade coverage and that the knife does not print excessively.

What to Consider Before Carrying

The SHPOS is a push/stab-oriented blade, not a general-purpose utility knife. Its S45vn steel holds an edge well but may be more brittle under lateral stress than tougher steels. The acid etch finish protects against corrosion but can show wear over time. The supplied information does not include a specific sheath retention method (e.g., strap or friction fit), so test retention before carrying.

Because the knife was designed for Special Operators, its carry and deployment assume training. Practice drawing and reholstering safely, especially from a plate carrier or pocket.

Maintenance Notes

The S45vn steel benefits from occasional oiling, especially in humid or saltwater environments. The acid etch finish does not require special care beyond wiping clean after use. The Black Burlap Micarta handle can be cleaned with mild soap and water, then dried thoroughly. Check the Allen bolts for tightness after heavy use; the supplied information does not specify a thread-locking compound, so you may choose to apply a removable thread locker if needed.

Related Articles

Customer Service
Home
Products
Cart
Profile