About the Scalper Decal/Sticker Dye Cut
The Half Face Blades Scalper Decal/Sticker Dye Cut is a durable vinyl sticker that lets you show your support for the brand. Made by Black Fire Creative, the dye-cut shape follows the iconic scalper logo precisely. It comes in two sizes: medium (approximately 7.5" x 4.75") and large (approximately 12" x 8"). Choose the size that best fits your gear, vehicle, or workspace.
Scalper Decal Key Details
- Scalper Decal/Sticker Dye Cut: Medium size measures approximately 7.5" x 4.75"; Large size measures approximately 12" x 8". Helps you pick the right size for your intended surface—a medium fits laptops, toolboxes, or car windows, while large works on truck tailgates or garage walls.

Scalper Decal/Sticker Dye Cut - Scalper Decal/Sticker Dye Cut: Dye-cut shape follows the scalper logo design. The precise cut means no background vinyl to trim, giving a clean, professional look that follows the logo outline exactly.
- Scalper Decal/Sticker Dye Cut: Made by Black Fire Creative. This brand is known for producing high-quality decals and stickers, so you can expect good adhesion and durability.
How to Apply Your Scalper Decal
For the best results, apply your decal to a clean, dry, and smooth surface. Avoid applying over dirt, wax, or fresh paint. Here are the general steps for a successful installation.
- Clean the surface: Wipe the area with isopropyl alcohol or a mild soap solution to remove grease and dust. Let it dry completely.
- Position the decal: Peel the backing paper slowly and place the decal on the surface. Use a piece of tape to hinge it if you want to adjust placement before pressing down.
- Squeegee out air bubbles: Starting from the center, press outward with a credit card or squeegee to remove air pockets. Work carefully to avoid stretching the vinyl.
- Let it cure: Allow the decal to bond before washing or exposing it to heavy moisture. Follow the supplied product instructions for the recommended bonding time to ensure the adhesive sets fully.
Removing the Decal When Needed
If you ever want to remove or replace your Scalper decal, gentle heat is your best friend. Use a hairdryer or heat gun on low to warm the vinyl. This softens the adhesive so you can peel the sticker away slowly. For any leftover residue, a dab of isopropyl alcohol or a citrus-based adhesive remover should clean it off without damaging most surfaces. Avoid using sharp scrapers that could scratch paint or glass.
Caring for Your Decal
Once applied, the Scalper decal is durable and weather-resistant, but a little care extends its life. Hand-wash the area gently rather than using a pressure washer directly on the decal. Avoid abrasive cleaners or scrubbing pads. If the decal is on a vehicle, parking in the shade or a garage helps prevent long-term sun fading. With reasonable care, the vinyl and adhesive should stay intact for years.


