Half Face Blades | tools that cut deep

How to Install HFB Black Cerakote Pocket Clip

How to Install HFB Black Cerakote Pocket Clip

By Half Face Blades | tools that cut deep | Published: 2026-10-26

Category: How-to Guides

Learn how to install the HFB Black Cerakote American Flag pocket clip on compatible folders, with step-by-step guidance and common mistakes to avoid.

Quick Answer

To install the HFB Black Cerakote American Flag pocket clip, first confirm your folder uses the arrow clip style, then remove the old clip, align the new one, and secure it with the included screws.

Why the Arrow Clip Style Matters

The HFB Black Cerakote American Flag pocket clip is a retro-fit design made specifically for folders that use an arrow-style clip. This includes the SHPOS Gen 1 & 2 Folders, Cavner Folder, Cav Jr Folder, and Karambito Folder. If your knife uses a different clip pattern, this pocket clip won't fit.

Before you start, check the shape of your current clip. If it has the characteristic arrow-like contour, you're good to go. If not, you'll need a clip designed for your specific folder model.

Tools You'll Need

The installation is straightforward and requires only a small Phillips-head screwdriver. The clip comes with two screws, so you won't need to source additional hardware. Make sure your screwdriver tip fits snugly to avoid stripping the screw heads.

Step-by-Step Installation

  1. Step 1: Remove the Existing Clip: Using a Phillips-head screwdriver, carefully remove the screws holding your current pocket clip in place. Keep the screws in a safe spot in case you need them later (though the new clip includes its own). Check that the screwdriver fits the screw head to avoid stripping.
  2. Step 2: Align the New Clip: Position the HFB Black Cerakote American Flag pocket clip over the mounting holes, ensuring the arrow shape points in the same direction as the original clip for correct carry orientation. If the holes don't align, stop and verify your knife uses the arrow clip style.
  3. Step 3: Secure the Screws: Thread the two included screws through the clip into the knife handle. Tighten them snugly, but avoid over-torquing, which can strip the threads or damage the clip finish. After tightening, test the clip by clipping it onto a pocket to ensure it holds securely.

About the HFB Black Cerakote Pocket Clip

Shop Related Products

HFB Black Cerakote American Flag Pocket Clip, Retro Fit (Arrow Clip Variant)

HFB Black Cerakote American Flag Pocket Clip, Retro Fit (Arrow Clip Variant)

$19.71 $27.00

Shop Now