How to Install Karambito Scales on Your Knife
By Half Face Blades | tools that cut deep | Published: 2026-10-29
Category: How-to Guides
Upgrade your Karambito with new Turquoise Rocky Wave Carbon scales. This guide walks through the installation steps, tools needed, and common pitfalls to avoid.
Quick Answer
Installing new Karambito scales is a straightforward swap that requires only a Torx driver and patience. The included hardware makes it easy to upgrade to Turquoise Rocky Wave Carbon scales for a textured grip and improved handling.
Why Upgrade Your Karambito Scales?
Swapping scales is one of the simplest ways to refresh your knife's look and feel without changing its core performance. The Turquoise Rocky Wave Carbon scales provide a secure, textured grip that enhances control during use, especially in wet or slippery conditions.
Because the scales come with all necessary hardware—including titanium Allen bolts—you don't need to source extra parts. Just make sure you have the right tools and a clean workspace before starting.
Tools You'll Need
You'll need a Torx T6 or T8 driver (depending on your Karambito model), a non-marring pry tool or plastic spudger, and a soft cloth to protect the blade and scales during the swap. A small container for screws helps prevent losing hardware.
Step-by-Step Installation Guide
- 1. Remove the Old Scales: Place the knife on a soft cloth. Use a Torx driver to unscrew the Allen bolts on both sides of the handle. Keep the bolts in a small container. Gently pry the old scales away from the liners using a plastic spudger. Work slowly to avoid scratching the blade or liners. Common mistake: using a metal tool can scratch the liners. Always use plastic or nylon.
- 2. Clean the Handle Liners: Wipe the exposed liners with a dry cloth to remove dust or debris. If there is old adhesive residue, use isopropyl alcohol on a cotton swab. Let the liners dry completely before proceeding. Checkpoint: ensure no moisture or residue remains, or the new scales may not sit flush.
- 3. Position the New Scales: Align the new Turquoise Rocky Wave Carbon scale over the liner, matching the screw holes. Press it gently into place. Repeat for the opposite side. The scales should fit snugly without forcing. If the scale doesn't align, check that you have the correct side (left vs. right) and that no debris is blocking the holes.
- 4. Install the Hardware: Insert the titanium Allen bolts through the scales and liners. Tighten them by hand first, then use the Torx driver to snug them evenly. Do not overtighten—stop when the bolt head is flush with the scale surface. Overtightening can crack carbon scales or strip the threads. Use gentle, even pressure.
- 5. Test the Fit and Function: Open and close the knife several times to ensure the scales don't interfere with the blade or locking mechanism. Check that all bolts remain tight. If the knife feels loose, re-tighten the bolts slightly. If the blade rubs against the scale, remove the scale and check for a burr or misalignment. Reinstall after correcting.
Product Facts
- Karambito Scales- Turquoise Rocky Wave Carbon, Ti Allen Bolts, Textured Grip: Fits Karambito models, Turquoise Rocky Wave Carbon construction, textured grip for enhanced handling, includes set of hardware, features titanium Allen bolts. The textured grip provides better control during use, and the included hardware means you can complete the swap without buying extra parts.
Karambito Scales- Turquoise Rocky Wave Carbon, Ti Allen Bolts, Textured Grip
