Disaster Jr Scales: Upgrade Your Knife Handle
By Half Face Blades | tools that cut deep | Published: 2026-10-23
Category: Product Reviews
Learn how to replace your Disaster Jr scales with red/black layered G10 and titanium Allen bolts for a durable, custom grip.
Quick answer
Replace your Disaster Jr factory scales with red/black layered G10 scales and titanium Allen bolts for a tougher, more secure grip that fits most 2020+ production models.
Why upgrade your Disaster Jr scales?
The stock scales on your Disaster Jr work fine, but layered G10 offers a noticeable improvement in durability and visual appeal. The red/black color scheme adds a custom look without sending the knife to a shop.
The included titanium Allen bolts are lighter than standard steel hardware and resist corrosion. Combined with the Iron Grip texture, the handle feels more secure in wet or gloved hands.
What you need to know before starting
These replacement scales are designed for most Disaster Jr production models from 2020 forward. If your knife is older than 2020, check the fit before disassembling.
The set includes scales and all necessary hardware, but you will need a T6 or T8 Torx driver (depending on your existing bolts) and a clean, well-lit workspace. Work over a magnetic tray to avoid losing small parts.
Step-by-step scale replacement
- Remove the existing scales: Use a Torx driver to unscrew the Allen bolts on both sides of the handle. Set the bolts aside in a magnetic tray. Gently pry the old scales away from the liners. Work slowly to avoid scratching the blade or liners. Common mistake: forcing the scales off can bend the liner tabs. If the scales resist, check for hidden adhesive or thread locker.
- Clean the liners and blade tang: Wipe the exposed metal surfaces with a lint-free cloth and isopropyl alcohol. Remove any old thread locker residue from the screw holes. Let the alcohol evaporate completely before proceeding. Skipping this step can leave debris that prevents the new scales from seating flush.
- Install the new G10 scales: Align the red/black layered G10 scales with the liners. Press them into place by hand. Make sure the Iron Grip texture faces outward and the cutouts match the liner contours exactly. Checkpoint: the scale should sit flat with no gaps. If it rocks, realign before tightening.
- Fasten with titanium Allen bolts: Insert the titanium Allen bolts through the scale holes and into the liner threads. Tighten them in a crisscross pattern to distribute pressure evenly. Stop when you feel firm resistance—do not overtighten. Common mistake: overtightening can strip the titanium threads or crack the G10. Use a torque driver set to 8–10 in-lbs if available.
- Test the action and fit: Open and close the blade several times to check for smooth movement. Verify that the pivot is not too tight or too loose. Adjust the pivot bolt if needed, then recheck the scale bolts for snugness. If the blade drags or feels gritty, the scales may be pinching the pivot. Loosen the scale bolts slightly and retest.
Product details
- Disaster Jr Scales- Red/Black Layered G10, Ti Allen Bolts, Iron Grip: Red/black layered G10 construction offers a durable and visually striking appearance. Layered G10 resists impact and moisture better than standard handle materials, so your upgrade lasts longer and stands out.
Disaster Jr Scales- Red/Black Layered G10, Ti Allen Bolts, Iron Grip - Disaster Jr Scales- Red/Black Layered G10, Ti Allen Bolts, Iron Grip: Includes titanium Allen bolts for a secure and lightweight fastening solution. Titanium bolts reduce overall weight and won't rust, making the knife easier to carry daily.
- Disaster Jr Scales- Red/Black Layered G10, Ti Allen Bolts, Iron Grip: Features an Iron Grip texture for enhanced handling. The texture gives you a non-slip hold even with sweaty or gloved hands, improving control during use.
